Optional remote control for use with PST Series 600 and 1000 Watt inverter models. Design Features - Remote push button ON/OFF - LED indicators for overload, over temperature and power - Includes 15' cable.

Remote control for SAM-1000, 1500, 2000 and 3000W inverters. 10 ft of wire included. Features bar meter monitor for battery charge level and output power & LED indicator lights for:

The 900-RC Remote Control comes with 33' of cable. The Remote Panel can be used to power ON/OFF and also monitor the charging status from a remote location.

Pure sine wave inverter, adaptive battery charger, transfer relay - All in ONE unit. Samlex Evolution Series inverter/chargers provide reliable AC power wherever it's needed. For use with boats, RVs, cabins and specialty vehicles, as well as alternative energy, back-up and emergency power applications. Using state-of-the-art technology, the Samlex EVO inverter/charger operates at 165 million instructions per second with lightening fast load & response times, has 9 points of physical protection monitoring (being scanned up to 10,000 times per second) to detect fault conditions & protect itself in a vast range of adverse environments. The EVO-2212 is a 2200 Watt Pure Sine inverter, 12 VDC input, 120 VAC output, 50/60 Hz. It intelligently integrates a 100 Amp 4 stage Battery Charger and a 40 Amp Transfer Relay into an advanced and affordable off-grid power solution.

The battery watch is a smart piece of equipment which automatically detects battery voltages between 7V and 32V; ideal for 12/24 volt systems. BW-01 Battery Watch - intelligent 12V/24V programmable system.

Battery Temperature Sensor Model No.DC-BTS-A-C is designed for use with Samlex Solar Charge Controller Model No.SCC-30AB(#449-10). It senses the temperature of the battery installation and sends this information to the Charge Controller, which automatically adjusts its voltage to ensure proper battery charging depending on the ambient temperature of the battery installation. Ring terminal with embedded sensor. Bare Positive (+) end (Red wire). Bare Negative (-) end (Black wire with red stripe). 10 Meters of two wire color coded cable.

Features: 3 stage intelligent Series Type PWM charging, Automatic battery voltage detection: 12V / 24V, 100% input and output within -35°C to +50°C. Electronic protections: overheating, overcharging, over discharge, overload and short circuit. Reverse protection any combination of solar module and battery.

The circuit board is completely electronically protected and with the LED user interface it is easy to check the battery state of charge at any time. Large terminals guarantee a simple connection to solar panels, battery and load. The SMC-10 and SMC-20 work on PWM as a low loss series controller. 10 Amps: Automatic detection of 12/24V. LEDs indicate battery state of charge. 5.70 x 3.93 x .94 (in). 20 Amps: Automatic detection of 12/24V. Voltage and current regulation. Multistage charging technology. Current compensated load disconnection. Automatic load reconnection. Temperature compensation. 7.36 x 3.78 x 1.77 (in).

Use the Samlex EVO-30AB Charge Controller as a stand-alone 30 amp solar charge controller or expand functionality of the EVO-RC-PLUS as the central display for both your EVO inverter/charger and your solar system. Features: When connected to the EVO™ inverter/charger, the EVO-30AB will follow the programming set in the unit. Add the EVO-RC-PLUS and it will display status for both the EVO™ inverter/charger and solar system from ONE remote display. Compatible with most battery types including Lead Acid and Lithium-Ion (LiFePO4) batteries. Manage multiple panels up to 600W in a 12V system, or up to 1000W in a 24V system under specified conditions. Dimensions: 4.81" X 1.87" X 4.15".